SKF high temperature bearings and bearing units are designed to deliver increased reliability, reduced complexity and decreased environmental impact in operating temperatures up to 350 °C (660 °F).Because SKF high temperature bearings correspond to the ISO dimensions of grease-lubricated bearings, production efficiencies and cost savings can be realized with a simple change to the SKF ...
SKF has more than 100 years of experience in various industries and applications, and is the only company that can support key aspects of the sealing system through its knowledge of bearings, seals, lubrication and associated science and technology. SKF offers expert advice and provides support throughout the life cycle of your sealing system.
Bearings, units and housings. Super-precision bearings. Principles of bearing selection and application
SKF bearings are coated with a rust-inhibiting compound and suitably packaged before distribution. For open bearings, the preservative provides protection against corrosion for approximately three years, provided the storage conditions are appropriate.
SKF started with a bearing, and to this day is still a world leader in the design and manufacture of rolling and plain bearings. Here you will find our full assortment, including a wide variety of bearing units and bearing housings. You can find the products you need by: Designation or dimensions: Fill in Product search on the right
When applying grease via the relubrication feature, the shaft should be rotating. Narrow bearings (dimension series 13 and 22) in the locating position can be displaced axially, so that the relubrication groove in the bearing does not line up with the relubrication hole in the housing cap.
Bearing relubrication offers multiple benefits in the interest of time, availability, and the assurance of suitable product. In some cases, lubricants break down before the bearings themselves, which is why re-lubrication is a valuable and cost-effective solution to keep your bearings running longer.
Product tables +. Deep groove ball bearings, single row, for high temperature applications; Insert bearings, with grub screws, for high temperature applications
The bearings share the radial wheel load. Additionally, when the wheel contacts the rail, the axial guiding force causes a moment load on the bearing arrangement (), which is balanced by additional opposite radial loads on the bearings.As the floating bearing arrangement is designed with the sleeve abutments located axially between the two inner rings, the bearing which has the lower radial ...